01
Filling lines
Dimension and material selection suited to product contact conditions and connection points.
Share your application
ÇINAR SİLİKON — PRODUCT SERIES 01
Silicone
Tubing.
It starts with the right dimensions.
It fits your application.
From filling lines to shrink-wrap machine rollers: silicone tubing solutions for your inside diameter, wall thickness, hardness and colour requirements.
01
01 / DIMENSIONSInside diameter · Outside diameter · Wall thickness
02
02 / MATERIALHardness · Colour · Transparency
03
03 / APPLICATIONSelection by operating conditions
01 / PRODUCT-SPECIFIC SOLUTIONS
Part of your production.
Supporting your needs.
We select tubing using more than diameter alone. We assess the connection arrangement, contact substances and operating conditions together.
02
Shrink-wrap machine rollers
Options determined by assessing shaft diameter, wall thickness and operating conditions together.
Send your shaft dimensions03
Machine connections
Let's clarify the inside diameter, outside diameter and flexibility needed for your existing connection.
Let's assess your connection02 / PROFILE / DIMENSIONS
Enter two dimensions.
See the wall thickness.
Enter the inside and outside diameters in millimetres. Calculate the wall thickness, then share your dimensions with our team.
TUBING CROSS-SECTIONmm
Cross-section diagram · Does not replace a technical drawing.
YOUR TUBING DIMENSIONS
Wall thickness mm(Outside diameter − inside diameter) ÷ 2
Share my dimensions via WhatsApp View the available size list →Let’s start with your technical drawing.Let’s assess the profile, installation dimensions and operating conditions together.
Explore the catalogue PRODUCTION & MATERIALS
Your dimensions are clear.
Now for the right selection.
We assess hardness, colour and transparency options according to your operating conditions. You can share a technical drawing or sample for custom size enquiries.
Explore the tubing catalogue ↗Minimum production for standard tubing
By outside diameter| Outside diameter | Minimum length |
|---|---|
| 15 mm and below | 100 m |
| Over 15 mm – 30 mm | 50 m |
| Over 30 mm | 30 m |
Production feasibility and quantity for custom sizes are assessed separately.
Medical tubing options
Platinum-cured, clear options; minimum production of 500–1000 m depending on the size. Discuss your application requirements with our team.
03 / PROJECT STEPS
From your drawing
to a production plan.
We can start with a technical drawing, sample or dimensioned photo.
Send your dimensions
Inside diameter, outside diameter or wall thickness; connection arrangement and technical drawing, if available.
Specify the operating conditions
Equipment, operating temperature and contact substances; pressure and movement conditions, if applicable.
Let's confirm quantities and preferences
Let's assess the total metres, hardness, colour and delivery requirements together.
Preparation guide
Prepare your project notes.
Choose your first step based on the information you have.
Prepare to share your drawing.
- Cross-section dimensions and tolerances
- Installation and operating conditions
- Required length or quantity
Your starting point determines the information to prepare for your quotation.
04 / YOUR QUESTIONS
The right profile.
The right start.
Let’s discuss your product and application questions.
ÇINAR SİLİKONGet technical supportHow should I specify tubing dimensions?
You can provide the inside and outside diameters in millimetres. Providing the inside diameter and wall thickness is also sufficient. The calculator above helps you determine the wall thickness.
What is the minimum production quantity?
For standard silicone tubing, outside diameters of 15 mm or less require a minimum production quantity of 100 m; over 15 mm up to 30 mm require 50 m; over 30 mm require 30 m. Medical tubing and custom sizes are assessed separately.
Where can I see the available sizes?
In the tubing size list you can explore options by inside and outside diameter. For medical options, medical tubing dimensions are also available to view.
Can I request a custom size and colour?
You can share your dimensions, hardness, colour and operating conditions. We will confirm production feasibility and the minimum quantity together at the quotation stage.
OTHER PRODUCT GROUPS
Solutions that work together.
THE NEXT STEP
Share your dimensions.
Let’s shape your solution together.
We can start with a technical drawing, sample or application details.