01
Industrial oven doors
Seal cross-sections are assessed for the door joint and installation arrangement.
Share your application
ÇINAR SİLİKON — PRODUCT SERIES 04
Oven Door
Seals.
A cross-section to fit your door.
Silicone suited to your conditions.
E, P, D, stemmed and U-channel bulb profiles for industrial oven doors. Let's assess the mounting channel and the seal's operating conditions together.
01
01 / DIMENSIONSChannel · Mounting base · Perimeter
02
02 / SELECTIONTemperature · Contact conditions
03
03 / APPLICATIONNew equipment and seal replacement
01 / PRODUCT-SPECIFIC SOLUTIONS
A cross-section that fits
your oven door.
A seal suited to your oven door's dimensions and installation arrangement. We assess the installation arrangement and operating conditions together.
02
Thermal processing equipment
Materials are selected based on the temperature and contact conditions at the seal location.
Share your application03
Replacing existing seals
The assessment starts with the old seal's cross-section, installation photos and length information.
Share your application02 / PROFILE / DIMENSIONS
Start with the installation.
Complete the picture with operating conditions.
We consider the cross-section, material and operating conditions together. You can start with a technical drawing, sample or dimensioned photo.
CROSS-SECTION STUDIO04 / 06
Illustrative diagram · Not to scale.
Selection and production information
Oven Seals| Cross-section options | Profiles suited to the application, such as E, P, D, stemmed and U-channel bulb profiles |
|---|---|
| Installation dimensions | Channel width, depth and mounting base |
| Contact information | Gap when closed and mating surface |
| Temperature information | Operating temperature at the seal location |
| Length | Total metres or door perimeter |
| Production conditions | Assessed at the quotation stage according to cross-section, material and quantity. |
Let’s start with your technical drawing.Let’s assess the profile, installation dimensions and operating conditions together.
Explore the catalogue 03 / PROJECT STEPS
From your requirements
to a production plan.
Let's clarify your requirements together using technical drawings, samples or dimensioned photos.
Cross-section and dimensions
Share the seal cross-section, mounting channel and door perimeter through measurements or a drawing.
Operating conditions
Specify the equipment, operating temperature and contact substances. Include pressure and movement conditions, if applicable.
Quantity and preferences
Provide the total metres or number of pieces, along with your hardness, colour and delivery requirements.
Preparation guide
Prepare your project notes.
Choose your first step based on the information you have.
Prepare to share your drawing.
- Cross-section dimensions and tolerances
- Installation and operating conditions
- Required length or quantity
Your starting point determines the information to prepare for your quotation.
04 / YOUR QUESTIONS
The right profile.
The right start.
Let’s discuss your product and application questions.
ÇINAR SİLİKONGet technical supportIs specifying the oven's internal temperature sufficient?
The assessment also requires the temperature at the seal location. This may differ from the oven's internal temperature.
Can I get a quotation using a photo of the old seal?
A cross-section photo and an image of the installation area help with the initial assessment. Measurements or a sample may be requested to confirm the details.
Can a custom seal be made for new equipment?
You can request a production feasibility assessment by sharing the door, channel and contact dimensions in a technical drawing.
OTHER PRODUCT GROUPS
Solutions that work together.
THE NEXT STEP
Share your dimensions.
Let’s shape your solution together.
We can start with a technical drawing, sample or application details.