FILLING AND TRANSFER
Flexible process connections
Connection diameter, flow rate, contact fluid and cleaning procedures are assessed together.
GENERAL / TUBING / OVEN / LID AND DRUM / INFLATABLE
Online
Catalogues
From products to applications.
Explore all five catalogues.
Explore silicone tubing, oven seals, lid seals and drum rubber profiles, and inflatable seal profiles, with dimensions and installation details.
DIGITAL CATALOGUE
Explore oven seals page by page.
View two facing pages together on desktop. On a phone, one page is displayed at a time; you can zoom in to see the details.
Select a section in the catalogue.
Find technical data sheets for E, P and D cross-sections in the profile catalogue and through the links in the downloadable PDF.
Catalogue contents and profile codes
Oven door seals
This catalogue brings together E, P and D cross-sections for oven door sealing, with dimensions and installation information.
- E profiles
- 20605 · 20606 · 20607 · 20615
- P profiles
- 20934 · 20973 · 20977 · 21017
- D profiles
- 20087 · 20089 · 20090 · 20103
Cross-section selection takes account of channel dimensions, door clearance and compression allowance. Material and operating temperature are specified for the application conditions.
For cross-section dimensions and technical data sheets, browse the profile catalogue for details. The eight-page PDF links to the technical data sheet for each profile.
MANUFACTURING FOR YOUR APPLICATION
Let's define your oven seal dimensions
together.
Share your cross-section, channel dimensions and oven operating conditions.
PRODUCT / APPLICATION / DIMENSIONS / MANUFACTURING
Silicone Product
Catalog
Discover our products.
Choose for your application.
Explore silicone tubing, selected actual profiles, cords, strips, lid and oven seals, and drum rubber profiles with example applications.
From product types to applications.
With dimensions and manufacturing information.
DIGITAL CATALOGUE
Explore our products page by page.
View two facing pages together on desktop. On a phone, one page is displayed at a time; you can zoom in to see the details.
Select a section in the catalogue.
Find profile technical data sheets in the profile catalogue and tubing dimensions on the product page.
MANUFACTURING FOR YOUR APPLICATION
Let's define your silicone requirements
together.
Share your cross-section, dimensions and application conditions.
PRODUCT / APPLICATION / DIMENSIONS / MANUFACTURING
Silicone Tubing
Catalog
Get to know the tubing.
Choose for your application.
Explore standard and platinum-cured medical silicone tubing for filling lines, process connections and shrink tunnel rollers.
From product types to applications.
With dimensions and manufacturing information.
DIGITAL CATALOGUE
Explore tubing page by page.
View two facing pages together on desktop. On a phone, one page is displayed at a time; you can zoom in to see the details.
Select a section in the catalogue.
The complete dimension lists are available on the product page.
FIND THE RIGHT TUBING FOR YOUR APPLICATION
Where and how is it used?
Assess tubing by its intended function as well as its diameter.
PLATINUM-CURED SILICONE
Laboratory and process
Select transparent tubing according to connection dimensions, fluid and application requirements.
ROLLER SLEEVES
Shrink-wrap machine rollers
Roller diameter, sleeve length, wall thickness and temperature are assessed alongside the installation requirements.
Images illustrate products and example applications.
DIMENSIONS AND MATERIAL
Inner diameter × outer diameter.
Silicone suited to the application.
Select the inner and outer diameters together. Wall thickness is half the difference between them. Also assess hardness, fluid, temperature and installation conditions.
965Standard tubing size
196Medical tubing size
The list shows a cross-section preview, wall thickness and minimum production quantity for each size.
Read the catalogue contents as text
01 / Cover
Silicone Tubing
Standard and platinum-cured silicone tubing.
PRODUCT TYPES / APPLICATIONS / TECHNICAL DIMENSIONS
02 / Intro and contents
Silicone tubing for your application
Select inside diameter, wall thickness and material together.
Silicone tubing can provide flexible fluid connections, link machine components or act as a roller sleeve. The right product depends on its function as well as its diameter.
Standard silicone tubing offers a choice of colors, hardness and cross-sections. Platinum-cured medical tubing forms a separate group, with a transparent appearance and its own size list.
This catalog covers product types, three applications, dimensioned cross-sections and minimum production quantities. The complete current size range is listed online.
03 / Dimensions and cross-section
How to read a tubing size
Inside diameter × outside diameter. These define the wall thickness.
Inside diameter d is the bore of the tubing, the starting point for connection and flow-area selection.
Outside diameter D is the distance across the outer surfaces. It defines the space required and overall cross-section.
Wall thickness t is the silicone wall on one side: t = (D - d) / 2.
For fluid transfer
Assess connection diameter, required flow rate, pressure or vacuum, and bend layout together.
For roller sleeves
Specify roller diameter, fitted length, wall thickness and operating conditions. Fit is determined by the application.
Cross-sections are proportional technical illustrations; printed and on-screen views are not at actual physical size.
04 / Standard silicone tubing
Standard silicone tubing
Different diameters and colors. Made for your application.
Product types
Red, white, black and clear samples show the product range. Specify color and hardness alongside inside diameter, outside diameter and wall thickness.
Typical applications
Filling and fluid transfer lines, machine connections and sleeves for shrink tunnel rollers. Function and operating conditions guide material selection.
Size options
The current list contains 965 sizes. Select an inside diameter online to view suitable outside diameters and wall thicknesses.
Production details
Minimum production is 100, 50 or 30 meters, based on outside diameter. The quantity for each size appears in the online table and cross-section preview.
Color and transparency are appearance options. Select material and hardness to suit operating conditions.
05 / Standard tubing cross-sections
Standard tubing cross-sections
Read size examples together with wall thickness and production quantity.
The sizes below are selected from the current standard tubing list. The 1 mm inside diameter group includes 1 × 3, 1 × 4, 1 × 5 and 1 × 6 mm options.
See all 965 sizes in the online tubing list. Each size opens its own proportional cross-section.
06 / Platinum-cured medical tubing
Platinum-cured medical tubing
Clear body. Platinum-cured silicone. Separate size and production list.
Material and appearance
This product group uses platinum-cured silicone. The clear body helps visually monitor flow. The open end shows the bore and silicone wall together.
Applications
For assessment in laboratory setups, process transfer and suitable pump connections. Specify the fluid, operating duration and cleaning method when requesting a quote.
Size options
The current medical tubing list contains 196 sizes, with inside diameters of 1-26 mm and a maximum outside diameter of 30 mm.
Production details
Minimum production is 500, 600, 800 or 1000 meters, based on inside diameter and wall thickness. All 1 mm inside diameter sizes require 1000 meters.
Required technical specifications and product documentation are confirmed for the selected material at quotation.
07 / Medical tubing cross-sections
Medical tubing cross-sections
Maximum outside diameter 30 mm. Production based on bore and wall thickness.
Cross-sections are selected from the current medical tubing list. For half-millimeter wall thicknesses, use the next whole thickness's minimum quantity. All 1 mm bore sizes require 1000 meters.
See all 196 sizes in the online medical tubing list. Black cross-sections are technical illustrations; the product image shows clear tubing.
08 / Filling and fluid transfer
Filling and fluid transfer lines
Flexible connections from tank to filling point.
Where is tubing used?
It provides a flexible fluid connection between tanks, manifolds and filling equipment. Tubing can be routed between fixed pipe connections to suit the layout.
Benefits in the application
A flexible line adapts to the connection layout. Clear options help visually monitor flow. Inside diameter and wall thickness are selected alongside flow and mechanical conditions.
FILLING / TRANSFER - Assess connection size, fluid and cleaning procedures together.
09 / Filling line selection
Selecting tubing for filling lines
Assess the whole line, from connections to cleaning.
01 / Connections and flow
Specify inlet and outlet diameters, required flow rate and line length. A narrow connection may restrict the selected tubing's flow area.
02 / Line conditions
Specify operating temperature, line pressure or vacuum requirements. Assess wall thickness and material against these conditions.
03 / Routing
Describe a layout that avoids sharp bends and crushing. Check tubing length, bending space and nearby equipment together.
04 / Cleaning
Specify cleaning fluid, method, temperature and contact time. Product-contact material and required documentation depend on the application.
- Transferred fluid and contact time
- Connection type, bore and line length
- Pressure / vacuum and temperature
- Cleaning method and documents
Transparency helps monitor flow; application conditions determine material selection.
10 / Laboratory and process
Laboratory and process connections
Flexible fluid transfer with clear platinum-cured tubing.
Where is tubing used?
For fluid transfer between laboratory vessels, process connections and suitable pump systems. Inside diameter and connection geometry depend on the setup's requirements.
Benefits in the application
The clear body helps monitor flow and connections. Flexible silicone tubing allows the connection route to follow the equipment layout.
PLATINUM-CURED SILICONE - Assess fluid, connections and cleaning conditions together.
11 / Medical process selection
Selecting platinum-cured tubing
Specify dimensions, operating conditions and documentation together.
Flow area and connection
Select the inside diameter for connection and flow needs. Outside diameter, wall thickness and fitting dimensions must be compatible.
Pump applications
A peristaltic pump repeatedly compresses the tubing. Specify pump model, tubing size, operating duration and fluid to assess a suitable material and cross-section.
Cleaning conditions
Specify the cleaning or sterilization method, temperature and cycle in your inquiry. Suitability of the selected material is assessed separately.
Documents and traceability
Share required tests, compliance documents and traceability requirements before quotation. These form part of product and material selection.
- ID × OD and line length
- Pump model and operating duration
- Fluid, temperature and cleaning
- Required tests and product documents
Platinum curing alone does not establish sterility or any specific compliance certification.
12 / Shrink tunnel rollers
Shrink-wrap machine rollers
Silicone sleeves for roller surfaces. Sized to fit.
Where is tubing used?
Silicone tubing can serve as a sleeve on shrink tunnel rollers. It forms a silicone contact surface on the roller; it does not convey fluid in this application.
Benefits in the application
Tubing is selected by roller diameter and required wall thickness for sleeve use. Assess fitted length, surface temperature, rotation and the product in contact together.
ROLLER SLEEVES - Roller diameter, sleeve length and operating conditions are key quotation details.
13 / Roller sleeve sizing and fitting
Roller sleeve sizing and fitting
Define the roller and silicone sleeve geometry together.
Roller diameter and fitted length
Share roller diameter, total sleeve length and the mounting surface. An existing sleeve sample or technical drawing helps with selection.
Wall thickness and layout
Assess wall thickness, outside diameter and clearance to nearby equipment together. Fit and tolerances depend on the application's requirements.
Operating conditions
Specify surface temperature, rotational speed, product contact and mechanical load. These guide hardness and material selection.
Replacement requirements
Send a cross-section photo, dimensions and operating conditions of the existing tubing. Let's assess the sleeve's fitting and operation together.
The diagram shows a silicone sleeve fitted over a roller. Final dimensions and fitting requirements depend on the application.
14 / Material properties
Select material properties together
Hardness, temperature and operating conditions matter alongside diameter.
Hardness and flexibility
Select Shore A hardness for bending, compression, fitting and contact needs. Pumps and roller sleeves create different mechanical conditions.
Temperature
Specify continuous and short-term operating temperatures separately. Include the temperature during cleaning cycles in material assessment.
Pressure and vacuum
Assess line pressure or vacuum, connections and tubing cross-section together. Wall thickness alone is not a performance rating.
Chemical contact
Specify the substance, concentration, temperature and contact time. Include cleaning fluids in the same assessment.
Color and transparency
Specify flow monitoring, product identification and appearance needs. Clear or colored appearance does not establish the material's technical grade.
Cleaning and documentation
Describe the cleaning or sterilization method and required documents. Requested properties are confirmed for the material offered.
Numerical operating limits are determined by the selected silicone material's technical data sheet.
15 / Minimum production quantities
Minimum production by size
Separate production rules for standard and medical tubing.
For standard tubing, minimum production depends on outside diameter. Medical tubing with a 1 mm bore has a special rule; other sizes are based on wall thickness.
Medical tubing with a 1 mm inner diameter has a minimum quantity of 1000 metres, regardless of wall thickness. For half-millimetre wall thicknesses, the quantity for the next whole-millimetre thickness applies.
16 / Quotes and contact
Let's define your tubing requirements together.
Share your dimensions and application.
Inside × outside diameter / Total length / Application
Hardness and color / Temperature / Pressure or vacuum
Technical drawing, existing tubing sample or cross-section photo
Images illustrate products and applications. Dimensions and minimum production quantities are taken from current Çınar Silikon product lists.
TECHNICAL SUPPORT FOR YOUR APPLICATION
Let's define your tubing requirements
together.
Share the inner diameter, outer diameter, total length and application conditions.
OVEN DOORS / E · P · D PROFILES
Oven Seals
Catalog
From oven door to cross-section selection.
E, P and D profile options.
Explore 12 oven door seal profiles, cross-section dimensions, installation and manufacturing information in one catalogue.
From product types to applications.
With dimensions and manufacturing information.
DIGITAL CATALOGUE
Explore oven seals page by page.
View two facing pages together on desktop. On a phone, one page is displayed at a time; you can zoom in to see the details.
Select a section in the catalogue.
Find technical data sheets for E, P and D cross-sections in the profile catalogue and through the links in the downloadable PDF.
Catalogue contents and profile codes
Oven door seals
This catalogue brings together E, P and D cross-sections for oven door sealing, with dimensions and installation information.
- E profiles
- 20605 · 20606 · 20607 · 20615
- P profiles
- 20934 · 20973 · 20977 · 21017
- D profiles
- 20087 · 20089 · 20090 · 20103
Cross-section selection takes account of channel dimensions, door clearance and compression allowance. Material and operating temperature are specified for the application conditions.
For cross-section dimensions and technical data sheets, browse the profile catalogue for details. The eight-page PDF links to the technical data sheet for each profile.
MANUFACTURING FOR YOUR APPLICATION
Let's define your oven seal dimensions
together.
Share your cross-section, channel dimensions and oven operating conditions.
LIP SEALS / INNER DRUM / OUTER DRUM PROFILES
Lid Seals
and Drum Rubber Profiles
Find the right cross-section for your machine.
Lip seals, inner and outer drum profiles.
Explore 12 profiles for lid seals and inner and outer drum rubber profiles, with cross-section dimensions, installation and manufacturing information.
From product types to applications.
With dimensions and manufacturing information.
DIGITAL CATALOGUE
Explore lid seals and drum profiles.
View two facing pages together on desktop. On a phone, one page is displayed at a time; you can zoom in to see the details.
Select a section in the catalogue.
Find technical data sheets for lip seals and inner and outer drum profiles in the profile catalogue and through the links in the downloadable PDF.
Catalogue contents and profile codes
Lid Seals and Drum Rubber Profiles
This catalogue brings together lip seals for lids, inner and outer drum profiles, cross-section dimensions and installation information.
- Lip seals for lids
- 20834 · 20838 · 20840 · 20853
- Inner drum profiles
- 30001 · 30003 · 30007 · 30014
- Outer drum profiles
- 30043 · 30046 · 30050 · 30054
Cross-section selection takes account of installation dimensions, operating clearance and compression allowance. Material and manufacturing conditions are specified for your machine's application.
For cross-section dimensions and technical data sheets, browse the profile catalogue for details. The eight-page PDF links to the technical data sheet for each profile.
MANUFACTURING FOR YOUR APPLICATION
Let's select the profile for your machine
you need together.
Share your cross-section, installation dimensions and machine operating conditions.
PROFILES / AIR CONNECTIONS / INSTALLATION
Inflatable Seal
Catalog
Inflates under pressure to conform to the sealing surface.
From profile to installation, in one catalogue.
Explore six profile groups, dimension tables, air connections and installation solutions across 16 pages.
From product types to applications.
With dimensions and manufacturing information.
DIGITAL CATALOGUE
Take a closer look at inflatable seals.
View two facing pages together on desktop. On a phone, one page is displayed at a time; you can zoom in to see the details.
Select a section in the catalogue.
Review the cross-sections together with their dimensions, sealing gap and mounting channel. Zoom in on the technical tables or download them as a PDF.
Catalogue contents and profile groups
Inflatable Seal Systems
This 16-page catalogue brings together inflatable silicone seal cross-sections and guidance on selecting them for specific applications.
- Profile groups
- Castellated · Special cross-section · Flexible sidewall · Snap-in base · Stem-base · Channel-fit
- Technical tables
- Cross-section dimensions, inflated height, reference pressures and bend radii.
- Air line
- Valve types, fittings and tubing connections.
- Installation
- Straight-length seals, moulded corners, mechanical retainers and profile selection.
Material and operating conditions are reviewed together for each application.
For other cross-sections, explore inflatable seal profiles .
MANUFACTURING FOR YOUR APPLICATION
The right seal for your application
you need together.
Share your profile, sealing gap and operating conditions so we can review the air connection and installation together.