Box profile
Enclosed internal cavity and flat outer surfaces.
From cross-section to application
Technical
Guides
The right cross-section and dimensions.
Silicone suited to your application.
Assess your profile, dimensions and installation details through illustrations. Let's clarify your technical requirements together.
Where should you start?
The right choice in four steps.
A visual guide from product cross-section to operating conditions.
- 01
Identify the cross-section
Determine whether the cross-section is solid, hollow or channelled.
- 02
Determine the dimensions
Measure both the cross-section and the installation area.
- 03
Share the conditions
Temperature, pressure and contact substances.
- 04
Send the drawing
Describe your requirements with a drawing or photo.
Profile and cross-section selection
Different cross-sections. The right choice for your application.
Examine the outer shape, internal cavity and mounting surface together.
D profile
Flat base and rounded top surface.
U-channel profile
A channel opening that surrounds the mating component.
02 Correct dimensioning
Read dimensions correctly.
Explain your requirements clearly.
Select the product type and examine the inside diameter, outside diameter and cross-section dimensions on the drawing.
Specify the measurement unit, tolerance and total length / metres.
Tubing dimension calculator
Calculate wall thickness.
t = (outside diameter − inside diameter) / 2
This tool calculates geometric wall thickness only. It does not calculate pressure resistance or suitability for an application.
Materials and operating conditions
Hardness and conditions.
Assess them together.
The higher the Shore A value, the harder the material. Selection is made together with the cross-section, closing force and application conditions.
- Specify the existing product's hardness and your colour requirements.
- Share continuous operating and cleaning conditions.
- Let's assess the required compliance documentation for your application.
Temperature and duration
Normal operating, brief peak and cleaning temperatures.
Pressure or vacuum
Operating value, connection method and equipment details.
Contact substances
Fluid, chemical, concentration and contact duration.
- 01 Mating component thickness
- 02 Channel opening
- 03 Seating depth
Installation and application
Profile and mating component.
A coordinated fit.
Consider more than the profile's outer dimensions. Also share the dimensions of the channel or edge where it fits.
- Dimensioned cross-section of the profile and mating component
- Contact surface and closing direction
- Corners, joints and total length
Technical drawing preparation
Share your drawing.
Let's clarify the details.
A dimensioned cross-section, application photo and operating conditions help with the assessment. If you do not have a drawing, share measurements and photos of your existing sample.
- Cross-section, measurement unit and required tolerances
- Equipment, installation location and operating conditions
- Length / metres, quantity, hardness and colour
PDF · DWG · DXF · JPG · PNG · WebPOne file · maximum 20 MB
Send a drawing or file
Check the dimensions
Key cross-section dimensions and measurement unit.
Show the application
Installation location and photos from different angles.
Specify your requirements
Quantity, length / metres, hardness and colour.
Çınar Silikon technical data sheets
Examine the cross-section in a dimensioned drawing.
Check the profile number, nominal dimensions and hardness in our technical data sheets.
20003
Silicone tubing catalogueTubing types, dimensions and production quantitiesBox Silicone Profile
Outer dimensions: 26 × 11 mm
70 Shore A · dimensioned cross-section
D Silicone Profile
Outer dimensions: 14 × 15 mm
70 Shore A · dimensioned cross-section
U-Channel Silicone Profile
Outer dimensions: 4 × 9,5 mm
70 Shore A · dimensioned cross-section
Inner Drum Silicone Profile
Outer dimensions: 30 × 27 mm
70 Shore A · dimensioned cross-section
Common questions
Short answers
before you choose.
Let's assess the product and application details together.
How can I choose the right profile?
Share the existing profile's cross-section, installation area dimensions and operating conditions. Let's assess solid, hollow and channelled cross-sections for your application.
Which dimensions are needed for tubing?
Inside diameter, outside diameter and length / metres are the key measurements. Wall thickness is half the difference between the outside and inside diameters. This value alone does not determine pressure resistance.
Can I send an enquiry without a drawing?
You can send a cross-section photo of your existing sample, its key dimensions and application photos. Let's clarify the necessary technical details together before production.
Is 70 Shore A suitable for every application?
The four data sheets shown here specify 70 Shore A. Suitable hardness is assessed together with cross-section, closing force, installation method and operating conditions.
Let's assess your application together.
Share your technical drawing or application photo.